Raudensky M., Horsky, J., Hajduk D., Cecho L., Interstand Cooling – Design, Control and Experience , Journal of Metallurgical and Mining Industry, 2010, Vol.2, No.3, ISSN 2075-0507

Bellerova H., Pohanka M., Raudensky M., Tseng A.A., Spray cooling by water based nanofluids with Al2O3 and TiO2, In Proc. ITHERM2010, June 2-5,2010, Las Vegas, USA, ISBN 978-1-4244-5343-6, ISSN 1087-9870

Hrabovsky, J.; Horsky, J., Numerical Simulation of the High Pressure Hydraulic Descaling, In Proc. Metal 2010, May 2010, ISBN 978-80-87294-15-4

Hnizdil, M.; Raudensky, M., Descaling by Pulsating Water Jet , In Proc. Metal 2010, May 2010, ISBN 978-80-87294-15-4

Slabakova, J.; Pohanka, M., Cooling efficiency of flat jet nozzles versus full cone nozzles on working roll, In Proc. Engineering Mechanics 2010, 10.-13. May 2010, ISBN 978-80-87012-26-0

Kvapil, J.; Pohanka, M., Water impact measurement of two overlapping high pressure flat jet nozzles using two different methods, In Proc. Engineering Mechanics 2010, 10.-13. May 2010, ISBN 978-80-87012-26-0

Pohanka M., Bellerova H., Raudensky M., Experimental Technique for Heat Transfer Measurements on Fast moving Sprayed Surfaces , Journal of ASTM International, Vol.6, No.4, 2009.

Bohacek J., Modelling of a Free-Falling Water Droplet, Handicap of CSF Approach and Its Improvement Design , In Proc. Water Jet 2009, 4-5 Nov.2009, ISBN 978-80-86407-81-4

Van Steden H., Bohacek J., Kotrbacek P., Raudensky M., Intensification of Roll Cooling in Hot Rolling with a Roll Wiper , Research Disclosure Journal, Oct.2009, ISSN 0374-4353.

Kotrbacek P., Pohanka M., HorskY J., Raudensky M., Modelling of Cooling and Thermal Load of Rolls in Hot Rolling , in the 3 rd S teelsim Conf., 8-9 Sept.2009, Leoben, Austria.

Raudensky M., HorskY J, Hajduk D., Cecho L., I nterstand Cooling – Design, Control and Experience , In the 5 th European Rolling Conference, 23-25 June 2009, London, UK

Raudensky M., Bohacek J., Leidenfrost Phenomena at Hot Sprayed Surface, In the 7 th ECI International Conference on Boiling Heat Transfer Boiling 2009, 3-7 May 2009, Florianopolis, Brazil.

Kotrbáček P., Horský J., Boháček J., Válek L., Zajíček I., Modification of Billet Continuous Casting Machine from Square to Round Geometry, In the 6 th European Conference on Continuous Casting 2008, Riccione, Italy, June 3-6, 2008, ISBN 88-85298-65- 6.

Pohanka M., Horský J., Inverse Algorithms for Time Dependent Boundary Reconstruction of Multidimensional Heat Conduction Model, In the seminar of Thermophysics 2007, Kočovce, Slovakia, October 11-12, 2007, ISBN 978-80-227-2746-4.

Raudenský M., Hydraulic Descaling and Roll Cooling , Conference of POSCO, Pohang, Korea , August 30.-31., 2007.

Horský J., Raudenský M., Vavrečka L., Experimental Study of Hydraulic Descaling,, In 5 th International Conference HEFAT 2007, Sun City, South Africa, July 1-4, 2007, ISBN: 978-86854-6435.

Pohanka M., Horský J., Juriga J., Petruška J., Optimization of Calibrated Shaped Rolls , In 16 th Metalurgical and Materials Conference METAL 2007, Hradec n/Moravicí, Czech Republic, May 22-24, 2007.

Pohanka M., Limitation of Thermal Inverse Algorithm and Boundary Conditions Reconstruction for Very Fast Changes on Boundary, In IM 2007, Svratka , Czech Republic , May 14-17, 2007, ISBN 978-80-87012-06-2.

Boháček J., Hnízdil M., Image Analysis of Water Jet, In IM 2007, Svratka , Czech Republic , May 14-17, 2007, ISBN 978-80-87012-06-2.

Horák A., Bellerová H., Influence of Coolant Type on Cooling Spray Intensity , In IM 2007, Svratka , Czech Republic , May 14-17, 2007, ISBN 978-80-87012-06-2.

Horák A., Boháček J., High – Speed Droplet Impact During Hydraulic Descaling Process, In IM 2007, Svratka, Czech Republic, May 14-17, 2007, ISBN 978-80-87012-06-2.

Raudenský M., Horský J., Pohanka M., Kotrbáček P., Cooling of Rolls in Hot Rolling of Long Products , In Rolls 4 2007, Birmingham , UK , March 14-16, 2007.

Raudenský M., Horák A., Horský J., Pohanka M., Kotrbáček P., Hydraulic Descaling Improvement, Findings of Jet Structure on Water Hammer Effect. La Revue de Métallurgie , February 2007, ISSN 0035-1563(print edition), ISSN 1156-3141.

Raudenský M., Horák A., Horský J., Pohanka M., Kotrbáček P., Hydraulic Descaling Improvement, Findings of Jet Structure on Water Hammer Effect, In Journees Siderurgiques Internationales, December 14-15, 2007.

Raudenský M., Horák A., Horský J., Pohanka M., Kotrbáček P., Hydraulic Descaling Improvement – Findings of jet Structure on Water Hammer Effect, La Revue de Mettallurgie – ATS – JSI, Paris 14 – 15 December 2006, pp. 34-35.

Boháček J., Ejector Type Cooling Nozzle , In Experimental Fluid Mechanics 2006, December 6-7, 2006, Liberec, Česká republika, ISBN 80-7372-141-4.

TSeng A.A., PArk J., Vakanas G.P., Wu H., Raudenský M., Chen T.P., Influence of Interface Oxidation on Transmission Laser Bonding of Wafers for Microsystem Packaging , Microsystem Technologies, Vol. 13, No. 1 January 2007, 49-59, ISSN 0946-7076.

Hajduk D., Horský J., Raudenský M., Control of ISC on Hot Strip Mill , In 7 th International Conference Steel Strip 2006, Přerov, October 4-6, 2006, ISBN 80-239-7750-4.

Raudenský M., Horský J., Kotrbáček P., Spray Cooling of Rotating Roll , In 13 th International Heat Transfer Conference, Sydney, August 13-18, 2006, ISBN 1-56700-226-9.

Raudenský M., Horský J., Kotrbacek P., Intensification and Control of Roll Cooling. In Steel Rolling 2006. Paris , June 19-21, 2006.

Morávka, J. & Kuběna, J. & Raudenský, M. aj. 2006. Závislost Leidenfrostovy teploty a HTC na parametrech ostřiku u vodních trysek. In Sborník přednášek 15. mezinárodní konference metalurgie a materiálů METAL 2006. Ostrava : Tanger, 23.-25.5.2006, referát č.86, 8 s. ISBN 80-86840-18-2.

Morávka, J. & Kuběna, J. & Horský, J. aj. 2006. Vliv ostřikových parametrů na Leidenfrostovou teplotu a intenzitu přenosu tepla v úseku sekundárního chlazení ZPO. In Sborník přednášek 22. celostátní konference se zahraniční účastí Teorie a praxe výroby a zpracování oceli, Rožnov pod Radhoštěm. Ostrava : Tanger a MARQ, 4.-5.4.2006, s. 133-139. ISBN 80-86840-15-8.

Horský, J., Raudenský, M., Kotrbáček, P.,and Tseng A. A.: Indentation and Piercing of Steel in a Mushy State , ASM International, Journal of Materials Engineering and Performance, Vol. 14, No. 5, 2005, p. 549-615, ISSN 1059-9495.

Kotrbáček, P., Horský, J., Raudenský, M., Pohanka, M.: Experimental Study of Heat Transfer in Hot Rolling , Revue de Metallurgie, 4 e trimestre 2005, p. 42-43, ISBN 2-911212- 05-3.

Kotrbáček P., Horský J., Vavrečka L.: Optimalizace chlazení hutních válců – výpočtová a experimentální analýza teplotní napjatosti ve tvarových válcích , Kalibrace válců 2005, prac. seminář, 15.- 16. června 2005, Čeladná.

Horák A., Střítecký P.: Influence of Surface Roughness on Spray Cooling Intensity in High Temperature Applications , Engineering Mechanics 2005, May 9-12, 2005, Svratka, Czech Republic, ISBN.80-85918-93-5.

Vavrečka L., Petruška J., Horský J.: Computational and Experimental Analysis of Thermal Stresses in Grooved Roll, Engineering Mechanics 2005, May 9-12, 2005, Svratka, Czech Republic, ISBN.80-85918-93-5.

Raudenský,M. – Horský. J.: Cooling in Hot Rolling, 4 th International Conference Therm Tech Form 2005, (Tale, Slovak Republic , September 5-8, 2005 ). Košice: Acta Metallurgica Slovaca, 2/2005, 11, p. 301-308, ISSN 1355-1532.

Horský, J. – Vavrečka, L. – Pohanka, M.: Simulation Of Thermal Behaviour Of Rolls In Rolling , 1 st International Conference on Simulation and Modelling of Metalurgical Processes in Steelmaking, 25 - 27 October 2005, Brno , Czech Republic

Horský, J., Raudenský, M., Tseng A.A.: Heat Transfer Study of secondary cooling in Continuous Casting, AISTech 2005, Iron & Steel technology Conference and exposition, May 9-12, 2005, Charlotte, USA.

Horský, J. – Raudenský, M.: Measurement of Heat Transfer Characteristics of Secondary Cooling in Continuous Casting, 14 th International Metallurgical & Materials Conference, Metal 2005 May 24-26, 2005, Hradec n/Moravicí, CR, ISBN 80-86840-13-1.

Horský,J., Kotrbáček,P., Petruška,J., Řídký,R.: Experimental Study of Semi-Solid Steel Deformation. International Journal of Forming Processes, Vol. 8- No. 1/2005, p. 63 – 75, ISSN 1292-7775, ISBN 2-7462-1163-7, Lavoisier, 2005.

Raudenský,M. – Horský. J.: Secondary Cooling in Continuous Casting and Leidenfrost Temperature , Ironmaking and Steelmaking Vol 32, No. 2 (2005), DOI 10.1179/174328105X15913, Maney, UK.

Horský, J. – Raudenský, M.- Pohanka, M.: Experimental Study of Heat Transfer in Hot Rolling and Continuous Casting, Materials Science Forum Vols. 473-474 (2005), Materials Science, Testing and Informatics II, ISSN 0255-5476, ISBN0-87849-957-1, Trans Tech Publications, Switzerland.

Kotrbáček, P. – Horský, J. – Raudenský, M.- Pohanka, M.: Influence of Parameters of Hydraulic Descaling on Temperature Losses and Surface Quality of Rolled Material , 10 th International Conference Metal Forming 2004, September 19-22, 2004, Krakow, Poland, ISBN 3-937057-08-0, ISSN 1619-9529.

Raudenský, M. – Horský, J. – Kotrbáček, P.: Controlled Cooling in Continuous Casting , 3 rd International Conference on Continuous Casting of Steel in developing Countries CCC`04, September 14-17, 2004, Beijing, China, ISSN 0449-749X, CN11-2118/TF.

Horský, J. – Raudenský, M. – Tseng. A. A.: Intensification of Roll Cooling Using a Two- level Pressure System , AISTech 2004 – Iron and Steel Conference and Exposition, September 15/17, 2004, Nashville, USA, ISBN 1-886362-76-9, ISSN 1551-6997.